3-ton double bed cation anion exchanger, ion exchange water treatment system

13Ton cation anion complex bed ion exchanger,Overview of ion exchange water treatment system:

Double bedThe system is usually composed of2Composed of tanks, each tank is filled with an appropriate amount of anion and cation exchange resin, with the cation bed at the front and the anion bed at the back. Users can choose the operating mode of the system based on their own operation and cost control, which can generally be divided into manual and automatic.Cation exchangerUsed to remove positively charged ions (cations), anion resin is used to remove negatively charged ions (anions). Cation exchange resin is used to replace hydrogen ions with cations such as calcium, magnesium, and sodium ions; Anion exchange resin replaces hydroxide ions with anions such as chloride ions, sulfate ions, and bicarbonate ions. The replaced hydrogen ions and hydroxide ions are synthesized to form water, and the ions in the water are removed to obtain pure water.

II3Ton Yang YinDouble bedion exchanger,Process flow of ion exchange water treatment system:

Raw water (tap water)--Raw water tank—Raw water booster pump—Activated carbon filter—Cation exchanger-Anion exchange bed—Online water quality detection instrument—Water storage tank—Water point

III3Ton cation anion exchanger,Performance parameters of ion exchange water treatment system:

Inlet water source: Municipal tap water (can also be groundwater or river water, lake water, etc., but river water and lake water require other pre-treatment)

2. Inlet pressure:0.2-0.5MPa

3. Inlet conductivity: ≤300us/cmIf the conductivity of the incoming water is too high, it is not recommended to use this method for treatment. It is recommended to use two or more groups in series or adoptReverse osmosis pure waterworkmanship

4. effluent quality: online conductivity ≤10us/cm(Can achieve)1us/cm）

e. Operating flow rate:8-30m3/h
f.Regeneration solution concentration:HCL2%-5% NaOH4%-8%
gRegeneration time:60minute

43Ton cation anion exchanger,Technical characteristics of ion exchange water treatment system:

Using traditional techniques, the effluent quality is stable;

2. Compared to a simple yin-yang bed/Compared with the double bed, Green Health Water Treatment Company has added a pre sand carbon filter to effectively filter impurities, residual chlorine, etc. in the water, pretreat the raw water, increase the service life of the resin, and maximize the performance of the resin; Simultaneously using stainless steel brackets and an electrical control system to create a complete set of equipment, easy to install and aesthetically pleasing in appearance;

3. The cost is currentlyPure water treatmentLow purification process

4. Install an online water quality detection instrument to monitor the quality of the effluent at any time. If it is not up to standard, it can be regenerated in a timely manner. An alarm can be configured according to customer needs to sound and light an alarm when the water quality is not suitable;

5. Small footprint, easy installation, economical and practical

6. When producing pure water, there is no need to discharge wastewater, and the amount of wastewater discharged during regeneration is also very small

7. Transform into traditionalIon exchange pure waterCompared to other systems, the use of Runxin multi way valve control reduces the complexity of valve operations and avoids operational errors.

Related searches:What are the reasons for contamination of ion exchange resins Ultra pure water treatment equipment system Introduction to the working principle of industrial pure water equipment