2XZ rotary vane vacuum pump

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Application of 2XZ rotary vane vacuum pump: The 2XZ rotary vane vacuum pump can be used alone or as a front-end pump for booster pumps, diffusion pumps, molecular pumps, and titanium pumps. The pump is connected to the motor, with high speed, small size, compact structure, and easy flowability. It can be used in electronic component manufacturing, vacuum drying, filtration, welding, metal smelting, refrigeration equipment repair, and instrument matching

Product Details

2XZ rotary vane vacuum pumpApplication:

2XZ typeRotary vane vacuum pumpIt can be used alone or as a front-end pump for booster pumps, diffusion pumps, molecular pumps, and titanium pumps. The pump is connected to the motor, with high speed, small size, compact structure, and easy flow operation. It can be used for electronic device manufacturing, vacuum drying, filtration, welding, metal smelting, refrigeration equipment repair, and instrument matching. Because it has the advantages of small size, light weight, and low operating noise, it is more suitable for use in laboratories.

2XZ rotary vane vacuum pumpThe structure and working principle of:

2XZ rotary vane vacuum pumpCharacteristics:

1. The 2XZ rotary vane vacuum pump is a type of vacuum equipment that can function independently or serve as a pre pump and pre pump for various high vacuum systems.

2. The vacuum pump shall operate continuously with the air inlet open for no more than three minutes.

3. Pumps are not suitable for extracting gases that are corrosive to metals, react chemically with pump oil, contain particulate dust, or contain explosive gases with high oxygen content.

4. Rotary vane vacuum pumps can be used as compression pumps or transfer pumps.

5. Working environment: Long term continuous operation is allowed under the conditions of a temperature range of 5 ℃ -40 ℃, relative temperature not exceeding 90%, and inlet pressure less than 1333Pa.

6. When installing the power supply, follow the wiring instructions on the motor label and ensure that the direction of motor rotation is consistent with the direction of the arrow on the support.

7. The diameter of the pipeline for continuous pumping of containers should not be less than the inlet diameter of the pump, and the pipeline should be short and have fewer bends, while paying attention to pipeline leakage.

8. Before starting each time, pay attention to checking the oil level, and it is advisable to fill the oil to a height of 4/5 of the diameter of the oil gauge glass when stopping the pump.

9. The pump oil of the rotary vane pump adopts SY1634-70 No.1 vacuum pump oil.

10. The 2XZ rotary vane vacuum pump can be started in one go under atmospheric or any vacuum degree.