1200 ℃ box furnace (7.2L)

1200 ℃ Box Furnace (7.2L) - KSL-1200X (2020.1.10- Reviewed by Kejing Laboratory)

1. Multiple optional accessories prompts 2. Invitation reminder for Kejing Laboratory 3. Tips for proper storage of accessories

▪ Install an F1/2-inch quartz glass observation window on the furnace door for customers to observe changes in the sample during the heating process;

▪ An air intake device can be added to replace the observation window;

▪ One end of the ventilation pipe is equipped with a stainless steel pagoda mouth joint with a diameter of 5mm, and the other end is installed as a corundum pipe, which is installed on the furnace door as an air inlet to introduce gas;

▪ This hole can be used to measure temperature or measure the electrical properties of a sample.

Operation video instrument operation video

▪ Temperature: 1200 ℃ (＜ 30min), continuous use temperature: 1100 ℃;

▪ Suggested heating rate: 10 ℃/min;

▪ Input power supply: AC220V, high power: 3.5KW;

▪ Furnace cavity size: 200mm × 300mm × 120mm (7.2L)

▪ Heating element: molybdenum doped iron chromium aluminum (surface coated with zirconia coating, which can greatly extend the service life);

▪ Thermocouple: K-type.

For more parameters, please contact Kejing Sales Department

▪ The surface of the inner furnace is coated with high-temperature alumina imported from the United States, which can improve the reflectivity and heating efficiency of the equipment, while also extending the service life of the instrument;

▪ Adopting a double-layer shell structure, the double-layer furnace shell is equipped with an air-cooled circulation system between them, so that the surface temperature of the shell is less than 60 ℃ (reference value);

▪ The exhaust port is installed at the top of the furnace to remove water vapor and pollutants, extending the service life of the heating element;

▪ There is a protective latch installed on the furnace door to prevent accidental opening and explosion;

▪ Equipped with overheating and disconnection protection, and with a power-off function when opening the door.

▪ Includes a YD518P temperature controller;

▪ PID automatic temperature control system;

▪ Intelligent 30 segment programmable control;

▪ Built in overheating protection and thermocouple fault alarm;

▪ Temperature control accuracy: ± 1 ℃;

▪ Default DB9 PC communication connection port;

▪ Passed MET certification;

▪ Optional computer temperature control software (for YD518P series controllers) can be used to control the heating curve and export data.

▪ Furnace size: 440mm L ´ 530mm W ´ 530mm H;

▪ Net weight: 45kg.

▪ CE certification

▪ All electrical components are certified by UL/MET/CSA

▪ If you pay separately, we can guarantee TUV (UL61010) or CSA certification for a single instrument

One year warranty, lifetime technical support.

Special reminder: Consumables such as heating elements, quartz tubes, sample crucibles, etc. are not included.

2. Damage caused by the use of corrosive and acidic gases is not covered by the warranty.

Click to view the after-sales service commitment letter.