0-100mm vernier caliper. 10cm caliper

0-100mm Vernier Calipers. 10cm Calipers Product Features:

1After measuring surface wear, it can be repaired;
2The arc-shaped measuring surface is suitable for precise internal measurement;
3The long measuring claw is used to measure positions that are usually difficult to reach;
4Measure the outer diameter and inner diameter;
5Stainless steel, fully quenched, chrome plated, laser engraved lines.
0-100mm Vernier Calipers. 10cm Calipers Product Parameters:

measurement rangemmCursor reading valuemmerrormm
0-300 0.02 ±0.04
0-500 0.02 ±0.05
0-600 0.02 ±0.07
0-800 0.02 ±0.07
0-1000 0.02 ±0.07
0-1500 0.02 00.00
0-2000 0.02 00.00
0-2500 0.02 00.00
0-3000 0.02 00.00
0-3500 0.02 00.00
0-5000 0.02 00.00
Reading method:

1When sticking to the object being measured, be careful not to apply too much force. Just stick it on, and be careful not to get it off center, especially when measuring the diameter. It should be stuck on the diameter and not tilted.
2The fixed screw can be rotated, and if it is available, it is usually placed on the cursor so that it can be taken down for reading. If it is not available, it can be read directly.
3Look at the cursor0At what position is the scale on the main ruler? Read the value on the main ruler at this position. If measured in millimeters, the main ruler will read the integer part.
4Read the cursor and see which scale on the cursor aligns perfectly with the scale on the main ruler. Read this scale