*Type material testing tensile machine

1*Type material testing tensile machineTechnical Specifications:

1: Range (0-5000N)

2: Test accuracy ≤ 0.5%

3: Testing accuracy of large deformation device ± 1mm

4: Test speed 0-500mm/min

5: Travel space 1200mm

6: Test width 350mm

7: Use power supply 220V 50HZ

8: Motor power 400W

9: The equipment size is approximately 560 × 650 × 1700mm

10: The equipment weighs approximately 180kg

11: Metal extensometer resolution 1/1000

12: Accuracy of metal extensometer ≤ 0.5%

13: Power amplification factor with 7-segment automatic switching

14: Power resolution: 1/100000

15: Displacement resolution 1/1000

II*Type material testing tensile machineSoftware Function Introduction:

1. The computer tension machine software can automatically read detection data such as tensile strength, yield strength, fracture strength, elastic modulus, elongation, etc. Formula editing can automatically calculate the force, stress, displacement, deformation and other data results at any point during the test process. The control and data processing of the experimental process comply with the requirements of the corresponding metal and non-metal material standards

2. Control methods: fixed speed, positioning displacement, fixed load, fixed load increase rate, fixed stress, fixed stress increase rate, fixed strain, fixed strain increase rate, and other control methods are optional

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data

5. Automatic saving: Test data and test conditions are automatically saved to prevent data loss caused by forgetting to save them

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting

7. Display method: Data and curves are dynamically displayed during the experimental process

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve

9. Curve selection: Stress strain, force displacement, force time, displacement time and other curves can be selected for display and printing

10. Unit switching: Force units: (g, kg, N), stress units: (displacement units: (m, mm, in))

11. Test report: The test report can be programmed and printed according to user requirements, and can be exported as an EXCEL file

12. Security protection: When the load exceeds 2-10%, automatic security protection is implemented

13. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data

III*Type material testing tensile machineDetailed configuration:

1: Adopting a set of high-precision German imported dual function sensors for tension and pressure

2: Capacity segmentation: Seven levels throughout the process: * 1, * 2, * 5, * 10, * 20, * 50, * 100

Adopting high-precision 24 bits A/D, sampling frequency of 200Hz, full range power, high resolution of 1/1000000

3: Power system: Panasonic motor, Panasonic frequency converter, German ball screw, German linear bearing, Korean synchronous belt/synchronous wheel drive

4: Control system: PulseCommand control method is adopted to make the control more accurate, with a speed control range of 0-500mm/min. After the test is completed, it will automatically return to the initial position and stop, automatically calculate/store.

5: Data transmission method: via USB

6: Display mode: Professional computer tensile testing software LCD computer screen display.

7: A linear dual correction system with full range one gear and precision full range seven gear force.

8: The professional version testing interface software can achieve control modes such as fixed speed, positioning movement, fixed load, fixed load increase rate, fixed stress increase rate, and fixed strain increase rate, as well as multiple control modes to meet different testing requirements.

9: Testing space: Testing width is about 350 mm, travel space is about 1200 mm

10: Full displacement: Imported encoder improves testing accuracy by 4 times, encoder has anti-interference function

11: Safety device: Overload automatic shutdown with electronic limit protection

12: Manual control method: wireless remote control device or manual operation box can be added

4*Type material testing tensile machineAttachment:

1: One Chinese user manual/one certificate of conformity

2: One set of experimental fixtures

3: One set of manual operation control device

4: One set of large deformation device

5: One set of LCD brand computer

6: One set of color printer/laser printer

7: One USB data transfer cable

8: One set of software (installed on the computer)