*Enhancing law enforcement capabilities, gas detection tubes for toxic gases

*Enhancing law enforcement capabilities, gas detection tubes for toxic gases

• Product Introduction

Occupational Health Series Gas Detection Tubeyestarget, aim at, address, focus on, in response toOccupational Health Supervision DepartmentrightA product developed by selecting different detection purposes and the concentration of toxic gases on site. For occupational health supervision, choose detection tubes that can detect toxic gases at a level of 10-200% occupational exposure limit.It is a must-have for professional emergency response departments.

• advantage

This series of detection tubes is compact and easy to carry, without the need for power and heat sources, analytical instruments and chemical reagents, sample pretreatment, and can directly perform semi quantitative measurements.

• Standard Configuration

*Enhancing law enforcement capabilities, gas detection tubes for toxic gases

(1) General requirements: Compact and easy to carry, no need for power and heat sources, no need for analytical instruments and chemical reagents, no need for sample pretreatment, and can directly perform semi quantitative measurements.
(2) Performance requirements: Toxic gas detection tubes have different detection ranges, and suitable detection tubes can be selected according to different detection purposes and the concentration of toxic gases on site. For occupational health supervision, it is recommended to choose detection tubes that can contain toxic gases at levels ranging from 10% to 200% of the occupational exposure limit.
(3) The range is as follows:
Manual sampling tube: 50ml/100ml;
Carbon monoxide (capable of detecting 3-60 mg/m3),
Hydrogen sulfide (capable of detecting 1-20 mg/m3),
CL2 (capable of detecting 0.1~2 mg/m3),
Carbon dioxide (capable of detecting 1800-36000 mg/m3),
Ammonia (capable of detecting 3-60 mg/m3),
Sulfur dioxide (capable of detecting 1-20 mg/m3),
Nitrogen oxides (capable of detecting 1-20 mg/m3),
Hydrogen chloride (capable of detecting 0.75-15 mg/m3),
Hydrogen fluoride (capable of detecting 0.2~4 mg/m3),
Ozone (capable of detecting 0.03~0.6 mg/m3),
Formaldehyde (able to detect 0.05~1 mg/m3), etc.
(4) Purpose: Used for semi quantitative detection of toxic gas concentration in the air of workplaces by occupational health law enforcement personnel.
(5) Usage: Take a certain volume of air sample and test it through a gas tube;
(6) Configuration: manual sampling tube, gas detection tube;
(7) The detectable gas types include carbon monoxide, hydrogen sulfide CL2、 Carbon dioxide, ammonia, sulfur dioxide, nitrogen oxides, hydrogen chloride, hydrogen fluoride, ozone, formaldehyde;

Occupational Health Series Gas Detection Tube

Gas detection tube (toxic gas detection tube)
1. Purpose: Used for semi quantitative detection of toxic gas concentrations in the air of workplaces by occupational health law enforcement personnel.
2. Requirements:
(1) General requirements: Compact and easy to carry, no need for power and heat sources, no need for analytical instruments and chemical reagents, no need for sample pretreatment, can directly perform semi quantitative measurements, can be read quickly on site, and provide user manuals.
(2) Performance requirements: Toxic gas detection tubes have different detection ranges, which can be selected according to different detection purposes and the concentration of toxic gases on site. Try to choose detection tubes that can detect toxic gases at 10% to 200% occupational exposure limit levels. The reference is as follows: carbon monoxide (detection concentration range: 3mg/m3~60mg/m3, the same below), hydrogen sulfide (1mg/m3~20mg/m3), CL2 (0.1mg/m3~2mg/m3), carbon dioxide (1800mg/m3~36000mg/m3), ammonia (3mg/m3~60mg/m3), sulfur dioxide (1mg/m3~20mg/m3), nitrogen oxides (1mg/m3~20mg/m3), hydrogen chloride (0.75mg/m3~15mg/m3), hydrogen fluoride (0.2mg/m3~4mg/m3), ozone (0.03mg/m3~0.6mg/m3), formaldehyde (0.05mg/m3~1mg/m3), etc.