The mineral water filling machine integrates flushing, filling, and capping. The overall frame is made of food grade 304 stainless steel, and the chassis and tabletop are made of iron square steel pipes spliced together. The small and medium-sized mineral water filling machine has an electrical box on the body, which can be used to fill non carbonated and low viscosity liquids such as purified water, mountain spring water, mineral water, soda water, etc. The filling valve is made of SUS304 and has a guide ring inside to prevent friction; 0-type silicone sealing ring has the advantages of no bottle filling, good sealing performance, fast filling speed, and accurate liquid level. In order to better use the filling machine, the mineral water filling machine should be regularly maintained and serviced, and it is also very important to do a good job of cleaning. The following will introduce how to maintain and clean the machine.

1. Before starting the machine, it is necessary to use the joystick to rotate it and check for any abnormalities. Only after confirming that it is normal can the machine be started.

2. When adjusting the machine, tools should be used appropriately. It is strictly prohibited to use excessive tools or force to disassemble parts to avoid damaging the components or affecting the performance of the machine.

3. After adjusting the machine, be sure to tighten any loose screws and use a shaking handle to rotate the machine to check if its movement meets the requirements before turning it on.

4. The machine must be kept clean, and it is strictly prohibited to have oil stains, liquids, or glass shards on the machine to avoid damage to the machine.

The membrane surface of the mineral water filling machine is easily covered by some microorganisms or inorganic substances, which affects its operating ability. Our ideal cleaning time is to clean it every six months. If the purified water equipment needs to be cleaned every month, it means that we need to adjust the equipment parameters and improve the pretreatment system. Therefore, chemical cleaning of the membrane of the purified water equipment is also a way to protect the pure water equipment system.