FMI51-A1AGCJA3A1A
[A] Certification: Non explosion proof occasions
[1] Shielding length L3: not selected (installation pipe height)
[A] Effective probe length L1; Insulation: 1000 mm, 10mm rod, 316L; PTFE customized according to user requirements
[GCJ] Process connection: Thread ISO228 G1/2, 316L, 25bar
[A] Electronic plug-in type, output: FEI50H; 4-20mA HART+display
[3] Shell: F17 aluminum IP66 NEMA4X
[A] Cable entrance: Cable sealing sleeve M20 (EEx d>thread M20)
[1] Probe type: integrated
[A] Additional options: Basic type

Capacitive level measurement: used for continuous measurement of liquids
·For media with a conductivity of 100 μ S/cm or higher, calibration is not required. At the factory, the probe is calibrated according to the length ordered (0%... 100%), which can be easily and quickly debugged.
·Menu guided local configuration through text display (optional)
·Can be used for safety systems, meeting SIL2 functional safety requirements according to IEC 61508
·The material in contact with the process is made of corrosion-resistant material, and the components in contact with the medium are made of FDA * material
·Second order overvoltage protection to prevent discharge from the container (gas discharge device and protective diode)
·When the medium forms adhesion, the electronic plug can be replaced
·Shorter response time for measurement values
·After replacing the electronic plug-in, there is no need to recalibrate
·Automatically detect electronic plugins
·Monitor insulation damage, probe breakage, or cable tearing
·Suitable for interface measurement

The Liquicap M integrated transmitter can be used for continuous liquid level measurement
Due to the continuous testing and experimentation of the probe during manufacturing (self sealing cone), it is very stable and reliable, and can be used for vacuum and even for overpressure up to 100 bar. The allowable operating temperature for medium containers made of sealing and insulation materials is -80 ° C to+200 ° C.
For liquids with a conductivity of 100 μ S/cm, the measurement is independent of the dielectric constant (DK). In this way, various liquids can be measured directly without recalibration.
Liquicap T can be used to connect with Fieldgate (remote acquisition of measurement values through Internet counting) and is an ideal solution for material inventory and optimized logistics (inventory control).