Technical requirements for two position three-way of Burkert solenoid valve

German Baode solenoid valve fluid control system, Burkert solenoid valve, Baode control valve, and Baode angle seat valve are all our advantageous products. German Baode two position three-way solenoid valve is particularly abundant in stock, and Shanghai West specializes in selling all imported solenoid valves from Europe, America, and Japan. We have a good market reputation and have many years of elite and professional technical teams to solve all your problems.

Working principle of Burkert solenoid valve:
1.3 The viscosity of the medium is usually below 50cSt. If the diameter exceeds 15mm, use the ZDF series multifunctional solenoid valve for special ordering. High viscosity solenoid valve with a diameter less than 15mm. When the cleanliness of the medium is not high, a backwash filter valve should be installed in front of the solenoid valve. When the pressure is low, a direct acting diaphragm solenoid valve such as CD-P can be used. If the medium flows in a directional manner and does not allow reverse flow, ZDF-N and ZQDF-N need to flow in both directions. Please make special requirements.
Electrical connection of brass and stainless steel valve body: A-shaped cable plug
There are through holes at different positions, each leading to a different oil pipe. The middle of the chamber is a valve, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, different oil discharge holes can be blocked or leaked out. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the oil pressure will push the piston of the cylinder, which in turn drives the piston rod, and the piston rod drives the mechanical device to move. In this way, the mechanical motion is controlled by controlling the current of the electromagnet. Principle: When powered on, the electromagnetic force opens the pilot hole, causing the pressure in the upper chamber to rapidly decrease, creating a pressure difference of high and low around the closing element. The fluid pressure pushes the closing element to move upward, and the valve opens; When the power is cut off, the spring force closes the pilot hole, and the inlet pressure quickly forms a lower and higher pressure difference around the closing valve through the bypass hole. The fluid pressure pushes the closing valve to move downward and close the valve.
BURKERT solenoid valve 5470EEx type: BURKERT 5470EEx solenoid valve, BURKERT explosion-proof solenoid valve, two position three-way, two position four-way.

Technical parameters of Burkert solenoid valve:
German BURKERT explosion-proof solenoid valve 5470EEx type
Inner hole: 4.0 millimeters
QNn value: 300 liters/minute
Connection interface: G, NPT, Rc 1/8,6mm insertion tube connector or combination installation, base plate interface 1/4 or 8mm insertion tube
Valve body material: Polyamide
Bottom plate material: polyamide
Sealing material: NBR
Medium temperature: -10 to+50 ℃
Pressure range: 2 to 10 bar
Inner hole DN 2.0-6.0 valve body material brass stainless steel provided on demand)
The 6027 type is a direct acting solenoid valve suitable for
High pressure type can reach 100 bar, high temperature type can reach+180 ° C
The system is a modular structure with coils that can rotate 360 degrees
Hall, short 2 cable connectors 419 520
Hall, 2 long cable connectors 419 522
Hall, short 2 cable connectors 419 521
Hall, 2 long cable connectors 419 529
Turning off filling and ventilation is also applicable to the push rod line of vacuum
Main sample of German BURKERT direct acting two position two-way solenoid valve
Valve body material: brass or stainless steel 1.4404 (316L)
Coil insulation grade epoxy resin H-grade
Connection port G 1/8, G 1/43 coil material
Epoxy resin coil insulation 8, (NPT and Rc provided as needed)
7 32 mm 177 522 177 523
7 32 mm 177 525 177 526
7 32 mm 177 528 177 529
7 32 mm 177 537 177 538
7 32 mm 177 540 177 541
7 32 mm 177 543 177 544
7 32 mm 177 546 177 547

Burkert solenoid valve stock model:
607902C KOMP-011-0124-0008-021-00-607902C
607903D KOMP-011-0124-0008-031-00-607903D
607904E KOMP-001-0124-0021-001-00-607904E
607905F KOMP-001-0124-0001-000-R0-607905
607912v compos-001 - 0124-0021-002 - 00-607912v
607913W KOMP-001-0124-0001-002-R0-607913W
607982U KOMP-001-0290-F607-982-00-607982U
608080L KOMP-024-0256-0027-000-00-608080L
608224L KOMP-000-1064-1033-000-00-608224L
608390X KOMP-006-0151-0014-002-00-608390X
608447L KOMP-012-0283-F608-447-00-608447L
608504N KOMP-500-0256-3004-215-00-608504N
608670F KOMP-009-0340-0102-000-00-608670F
608740D KOMP-001-0211-0014-007-00-608740D
608965K KOMP-024-0355-0018-000-00-608965K
609021D KOMP-017-0255-3012-001-00-609021D
609041R KOMP-001-0255-1085-085-00-609041R
609078W KOMP-001-0255-1023-056-00-609078W
609081A KOMP-001-0255-1023-074-00-609081A
609088R KOMP-001-0255-1023-086-00-609088R
609145N KOMP-004-0180-0022-000-00-609145N
609393P KOMP-006-2000-F609-393-00-609393
609407N KOMP-009-0115-0003-001-00-609407N
609469T KOMP-500-0330-3150-305-00-609469
609470Y KOMP-500-0330-3150-302-00-609470
609482H KOMP-500-0330-3150-102-00-609482H
609502M KOMP-009-0282-G014-279-00-609502M

Burkert solenoid valve two position three-way parameters:
Inner hole DN2.0-6.0mm
Valve body material: brass, stainless steel
Sealing material FPM, PTFE/graphite (EPDM can be provided as needed)
Neutral gases and liquids in the medium
Medium temperature FPM -10 to 100 ° C PTFE/graphite Up to 180 ° C
Environmental temperature Max. 55 ° C
Voltage ± 10%
Load cycle 100% continuous operation
60% (30 minutes) intermittent operation during combined installation, or use 5W coil
Electrical connection DIN43650 A-type plug, compatible with 2508 cable socket
Protection level with cable socket IP 65
Installation can be done as needed, with the coil facing upwards

Other spot models:
ATOS AGMZO-TERS-PS-10/315.
ATOS DLOH-2C-U 24DC
ATOS DLOH-3A/-UX24DC/PE
ATOS AGAM-10/10/350/WG
ATOS DHZO-TE-071-L5
ATOS DPZO-AE-373-D5/DGI
ATOS DPZO-TE-373-D5
ATOS RZMO-TERS-PS-010/315
ATOS DLHZO-TE-040-L71
ATOS RZMO-TERS-PS-010/210
ATOS RZGO-A-033/315
ATOS E-ATR-7/100/I
ATOS E-ATR-7/400/I
ATOS E-ME-AC-05F
ATOS E-ME-AC-01F
ATOS DHI-0713/ 24DC
ATOS AGMZO-TERS-PS-10/315
ATOS AGMZO-REB P NP-10/210/I
ATOS QVHZO-TE-06/12
ATOS DKZOR-TE-171-L3/I