Specification ModelThe length of all pipe interfaces of the water tank, including the inlet pipe, outlet pipe, overflow pipe, and fire pipe, shall not exceed 200mm from the box body. The interfaces shall be welded with threaded or flanged joints, external ladders, manholes, breathable caps, glass liquid levels, display pipes, manhole locks, channel steel bases, etc.

When the filter layer accumulates to a certain degree of pollution and the water level reaches its limit, the water level controller will act to close the inlet valve, open the (backwash pump) backwash valve, and run for 3 minutes.
2. Close the recoil valve (recoil pump), close the drain valve, and open the inlet valve.
3. Mud discharge is scheduled.
4. Plasma cutting equipment is suitable for metal sheets such as low-carbon steel plates, copper plates, iron plates, aluminum plates, galvanized plates, titanium plates, etc.
5. The CNC system has a high configuration. Automatic arc initiation, stable performance, with a success rate of over 99% for arc initiation.
6. Fully automatic integrated water purifier, with an energy-saving new hydraulic clarification and rectification device inclined tube sedimentation on the upper layer, and a homogeneous quartz sand and anthracite filter on the lower layer.
7. Lightweight, neat, shiny, aesthetically pleasing, and practical in appearance.
8. Reasonable structural design, fully welded on-site combination, high strength, good sealing, preventing secondary pollution of water quality, and no leakage.
9. The material of the stainless steel combined square water tank is stainless steel, and the stainless steel welding wire is made of welding wire with strong corrosion resistance. It is assembled and arc welded on site, which is beautiful and elegant.

1. The stainless steel rectangular water tank body adopts a new type of molded plate, which has uniform pressure bearing and no pressure bearing gaps on the overall surface, further enhancing the compressive strength of the product, and has a beautiful appearance.
2. The rack adopts a fully welded structure, which is sturdy and reasonable, easy to operate, and is made of stainless steel plasma cutting equipment, durable and long-lasting. Plasma cutting tube equipment, plasma cutting tube machine.
3. Fast cutting speed and high precision. The cutting edge is small, neat, and free of slag. On the basis of traditional CNC systems, the control method for cutting has been improved to avoid secondary trimming processing.
4. It is highly energy-efficient with minimal inlet energy consumption and saves flushing water.
5. The coagulation clarification and filtration water purification effect is significant, and the filter layer is washed quickly and thoroughly.
6. Reasonably construct a three-dimensional organic combination of coagulation clarification and filtration processes.
7. Online water quality monitoring and control, real-time monitoring of water quality changes, ensuring water quality safety;
8. Fully automatic electronic control program, with optional touch screen operation, easy to use
9. Personalized design that meets local water quality needs.
10. The reverse osmosis device has a high degree of automation, and the workload for operation, maintenance, and equipment maintenance is minimal.
11. Made of rigid polyvinyl chloride plastic board or fiberglass material, lightweight, easy to process, and corrosion-resistant.
12. Choose energy-saving axial flow nozzles with large spray volume, low spray pressure, and low power consumption.
13. Adopting a segmented combination structure, it is convenient for transportation and installation. The combination of each tower section can be rotated freely, and the direction of the air inlet and outlet can be adjusted freely, making installation flexible.
Specification and model of buried oil separation tank