LABOM temperature transmission moduleIt is a field installed temperature transmission unit in the instrument. The LABOM temperature transmission module adopts a two-wire transmission method (two wires as power input and a common transmission line for signal output). The thermal resistance signal is converted into a 4-20mA output signal that is linear with the input electrical signal or the measured temperature. The transmitter can be installed in the junction box of thermocouples and thermal resistors to form an integrated structure. The LABOM temperature transmission module, as a new generation of temperature measuring instrument, can be widely used in industrial sectors such as metallurgy, petrochemicals, power, light industry, textiles, food, national defense, and scientific research.

Characteristics of LABOM temperature transmission module:

1. Adopting an epoxy resin sealing structure, it is earthquake resistant, temperature resistant, and suitable for installation and use in harsh on-site environments.

2. Installed on-site in the junction box of thermal resistors and thermocouples, it directly outputs 4-20mA. The LABOM temperature transmission module not only saves expensive compensation wire costs, but also improves the resistance during long-distance signal transmission.

3. The LABOM temperature transmission module has high accuracy, low power consumption, wide temperature range for use, and stable and reliable operation.

4. The range is adjustable and has a linearization correction function,LABOM temperature transmission moduleEquipped with automatic cold end compensation function.

The LABOM temperature transmission module has a wide range of applications, which can form an integrated on-site installation structure with thermocouples and thermistors, or be installed as a functional module in detection equipment.

Attention to LABOM temperature transmission module:

1. The external connection terminal is an M3.5 screw. Use non welded crimping terminals for connection.

2. Power switches and fuses should be installed externally. *Use 0. fuse (use fast melting type when using 24V DC power supply).

3. The instrument is equipped with overcurrent protection function inside, which can prevent damage to the instrument due to internal power short circuit.

4. When not using the first output, short-circuit the first output terminal.

5. In situations affected by lightning,LABOM temperature transmission modulePlease install a lightning arrester for use.