Purchase the operation process of Sanle Guang style mooncake automatic molding machine

1、 The mooncake automatic molding machine should be equipped with dedicated operators.

2、 Before starting up, check the cleanliness and hygiene of the machine, as well as whether each operating part is flexible and reliable.

3、 Before production, adjust the height of the molding die and the length of the molding time according to the characteristics of different products and the requirements of the production process. Production can only be carried out after adjusting the parameters to meet the process requirements.

4、 The transmission chain of the mooncake automatic molding machine should be lubricated once a week, and after every three work shifts, the oil mist generator should be filled with oil.

5、 If any abnormalities occur during operation, the power should be immediately cut off and restarted after the fault is resolved.

6、 After each shift, the oil-water separation product should be drained once, all conveyor belts should be cleaned, and the main power supply should be cut off.

7、 It is strictly prohibited for hands to enter the operating mechanism and place it on the cake making machine head during operation.

8、 It is strictly prohibited for hands and utensils to enter the spiral conveyor mechanism during the operation of the mooncake automatic molding machine.

9、 If there is any abnormal phenomenon during the operation of the mooncake automatic molding machine, the main power should be cut off immediately. After the fault is eliminated, it can be reproduced.

10、 After each shift of production, the mooncake automatic molding machine should clean the skin, filling screw conveyor and other mechanisms, and add lubricating oil to the operating parts. The transmission chain of the mooncake automatic molding machine must be lubricated once a week.

The above is the correct usage method of the Guangzhou style mooncake automatic molding machine, hoping to be helpful to everyone.