Air coolers are divided into refrigeration industrial air coolers and household air coolers,Industrial air conditionerGenerally used in cold storage and cold chain logistics refrigeration environments, household air coolers, also known as water-cooled air conditioners, are evaporative cooling and ventilation units that integrate cooling, ventilation, dust prevention, deodorization, and humidification.

Cleaning method

Step 1: Remove the wet curtain (consisting of four parts, which can be arranged in no particular order)

1. First, unscrew the three screws on the upper part of the wet curtain.

2. Grasp the upper part of the wet curtain and gently pull it outward, then lift it up slightly to remove the wet curtain.

Secondly, remove the top cover and water pipe assembly.

1. First unscrew the screws on the top cover, and then lift the top cover up and down.

2. Loosen the hose clamp on the water supply pipe and loosen the water supply pipe. Lift up and remove the water distribution pipe assembly.

Thirdly, cleaning of water pipes.

1. If the hole on the water pipe is blocked, it can be punctured with wire.

2. Clean the stains on the cloth pipe with clean water.

Fourth: Cleaning of chassis and accessories.

1. Cleaning the chassis: The chassis can be cleaned with a soft cloth or brush.

2. Cleaning the fan blades: Use a soft cloth to wipe the blades. Be careful not to let dust on the fan blades fall into the air duct.

3. Clean the water level sensor: Use a small damp cloth to wash away the dirt on the water level.

4. Cleaning the water pump: Use a brush to clean the accumulated dirt on the water pump and its filter screen.

5. Clean laundry drain valve: Pay attention to the dirt at the bottom of the drain valve.

Fifth: Wet curtain cleaning.

1. Rinse the wet curtain with clean water from inside out (note: the water pressure should not be too high during cleaning, and it is strictly prohibited to use acidic or alkaline cleaning agents to clean the wet curtain).

2. Filter: The filter can be removed and cleaned once a week. (Limited to models with filter screens).

Sixth: Cleaning of filters. The cleaning method is as follows:

1. Twist off the back cover of the filter:

2. Remove dirt from the filter element: Reinstall the back cover.

Seventh: After cleaning, reinstall the entire machine in reverse order of the disassembly steps. (Warning: When cleaning the unit, it is necessary to shut down and turn off the power, otherwise there may be a risk of electric shock or other harm to the human body caused by the unit.).