The linear sealing machine is a filling and sealing host in liquid production lines, mainly used for filling, capping, capping (rolling), and sealing 30-500ml glass bottles. It adopts a chain belt for bottle feeding and reliable bottle feeding, with eight to twelve head filling, four head capping (rolling), electromagnetic oscillation capping, high capping rate, easy adjustment, and stable performance. The machine combines filling and sealing into one, with a compact design and structure. Suitable for filling and sealing ampoule filling liquids in the pharmaceutical and chemical industries.

A brief introduction to several aspects that need to be paid attention to when using a linear sealing machine is as follows:

1. This machine is equipped with a bottle shortage and stagnation machine protection. When there are only 2 tooling boxes left in the bottle sorting track, the automatic stop micro switch will be disconnected, and the filling will automatically stop. At this time, the fault light will be on. If you need to continue filling, you can turn the manual and automatic switches to the manual side, and the machine will start running.

2. If the bubbles in the tube cannot be removed for a long time, resulting in inaccurate filling volume, the main reason is that a certain piece of the pump liquid channel is leaking. You can check the piston sealing ring in the total metering pump cylinder body, the silicone head in the upper and lower check valves, and other joints. If there is too much residue in the medicine, the quality check may cause the valve to get stuck and the one-way valve to not fully close, which can also result in inaccurate filling.

3. When filling, the total metering pump needs to be run for about 3 minutes to exhaust the bubbles in the tube, so that the filling amount can be accurate.