Touchscreen PCT high-voltage accelerated aging test chamberDetailed introduction:

Touchscreen PCT high-voltage accelerated aging test chamber 135384697007 Suitable for national defense, aerospace, automotive components, electronic parts, plastics, magnet industries, pharmaceutical circuit boards, multi-layer circuit boards IC、LCD、 The testing of sealing performance for products such as magnets, lighting fixtures, and lighting products, as well as accelerated life testing for related products, is used in the design phase to quickly expose product defects and weak links. Test the durability and airtightness of its products.

Touchscreen PCT high-voltage accelerated aging test chamberSpecification testing:

specification：PCT-25PCT-35PCT-45PCT-65

Inner box size (W ‧ H ‧ D) cm：￠ 250 × 300, ￠ 350 × 400, ￠ 450 × 500, ￠ 650 × 600

Inner box material：Stainless steel # 316

Outer box material：Spray painted or stainless steel plate

temperature range：+10 ℃~132 ℃ (optional up to 147 ℃ for special customization)

Hydration method：Stainless steel float ball water replenishment

humidification system：electric heating tube

power configuration：Multi resistance solenoid valve with one input and one output power supply

pressurization time：Pressure 2、0kg/cm2 approximately 45 minutes 3、0kg/cm2 for approximately 55 minutes

Voltage (V)：220V~240V50/60HZ single-phase

Touchscreen PCT high-voltage accelerated aging test chamberCharacteristics:

1、technologyprofessionalIt has an automatic water addition function and can automatically add water for 200 hours when the water level is too low during the experiment.

2、The design of the circular lining during the experiment can avoid the loss of the test sample due to steam overheating impact.

3、The circular door design can seal the temperature and pressure safety lock control, and only when the lock is firm can the testing machine be started. When the pressure inside the box exceeds the limit, it has automatic or manual pressure relief.

4、Timing installation, LED digital timer. When the temperature inside the pot reaches, the timer ensures the test *, and the timing is driven from Table 1.

5AccurateThe pressure and temperature inside the pot are constantly displayed on the thermometer,accuratePressure+0、2~2The0kg/cm2、

6、Before the experiment begins, use a vacuum pump to evacuate and filter the original air of the machine until it is completely fresh air before starting the test.

7、The box has been polished to be durable, aesthetically pleasing, and stain free.

8、During operation, the flowing water automatically discharges unsaturated steam and has reached saturation.

9、Abnormal cause and fault indicator light display, set automatic protection limit security.

Touchscreen PCT high-voltage accelerated aging test chamberSafety device

The environmental temperature of the installation site should not change rapidly, generally at room temperature (25-30) ℃,

It should be installed on a horizontal surface (a horizontal box should be used to confirm the level on the ground during installation).

It should be installed in a well ventilated area to extend the lifespan of the testing machine.

Places where combustible materials, baozha materials, and high-temperature heat sources cannot be tested.

Install as close to the power supply as possible.

Touchscreen PCT high-voltage accelerated aging test chamberStress testing:

Relative pressure: 0~4kg/cm2

Pot pressure: 0-2The5kg/cm2

yesRegarding pressure: 1The0kg/cm2~2The5kg/cm

One standard atmospheric pressure: 101325pa (Pa)=101、3 (kilopascals)

Circulation method: Natural convection circulation of water vapor.