Forest fireproof suitUsed as a * outfit for forest fires or when forest property encounters large fire scenes for firefighting and rescue, it can also be equipped with necessary firefighting sticks, wind turbines, and other equipment for firefighting and rescue.

Maintenance Method

1. After each use and removal, check the condition of the fireproof suit, with a focus on checking for wear and tear.

2. If you want to remove residual dirt from fireproof clothing, use tap water and neutral soap, and if necessary, use detergent Detergents should only be used on contaminated areas, and care should be taken as they may damage the aluminum plated surface.

3. If fire-resistant clothing has come into contact with chemicals or if bubbles are found, the entire aluminum plated surface should be cleaned. If there is residual oil or grease on the fireproof clothing, it should be cleaned with neutral soap.

4. Fireproof clothing must be dried thoroughly and not folded before being stored again.

5. If there are small but not very serious burn marks or wear on the surface of the fireproof suit, it can be repaired with an aluminum plated spray gun. If the exterior of the fireproof suit is damaged, it should be replaced.