Glass rotor flowmeterMost of them belong to glass products, and their main measuring components are glass products. Glass is fragile, so how to transport and store it correctly and avoid damaging the glass tube has become a key issue. In order to ensure the safety of the instrument and the staff themselves, the flow meter should be placed in a relatively stable place so that it can be used with peace of mind.

When using a flowmeter installed on a pipeline, it is necessary to strictly follow the flowmeter operation manual, clarify that the working pressure and temperature meet the requirements of the flowmeter setting, and prevent inaccurate measurement and damage to the flowmeter caused by excessive or insufficient pressure. Excessive pressure can cause the glass tube to break or the float to get stuck and unable to move flexibly. During installation, it is also important to be careful to protect the instrument and carry the flowmeter with professional protective gloves to prevent personnel from being cut by glass products.

The operator should read the instruction manual carefully before use. When opening the valve, be sure to slowly open it. If the estimated flow can float the rotor but the rotor does not move upward! At this point, immediately stop opening the valve and gently tap the pipeline! Enable the rotor to slowly rise. Many operators open the valve too forcefully! Just installed a new device! The sudden opening of the valve caused damage to the glass tube inside the glass rotor flowmeter. This should be noted by users

Some operators like to remove the front cover for use, but this is not allowed because the glass tube is prone to bursting and the cover provides protection. So the cover cannot be removed for use.

After using the flow meter, for the glass rotor flow meter that is not in use temporarily, it is necessary to find a suitable storage environment to prevent damage, maintain the cleanliness of the flow meter and the integrity of the spare parts. There should be a professional place and container to store the flow meter that is not in use temporarily, and avoid frequent movement because the glass tube of the flow meter contains a stainless steel float. Frequent movement can cause the float to collide with the glass tube, which can easily lead to human damage.