Ika vortex oscillatorIt has the characteristics of simple and reliable structure, small instrument size, low power consumption, and low noise, and is widely used in experimental needs such as biochemistry, genetic engineering, and medicine. For liquid, liquid-solid, and solid solid (powder) mixing, it can quickly mix any liquid or powder you need in the form of high-speed vortices, with fast, uniform, and * mixing speed. All mixer bodies are made of reinforced engineering plastic molding technology, with no paint spraying, acid and alkali resistance, and collision resistance. The worktable is made of wear-resistant natural rubber, which changes the disadvantage of the original sponge worktable being easily damaged. The instrument integrates all functions such as continuous, speed regulation, point vibration, flat plate type, bowl type, etc.

So how should we use vortex oscillators correctly? Today, the editor will introduce it to everyone.

　　Ika vortex oscillatorSteps to use:

1. Before using the instrument, place the speed control knob in the smallest position and turn off the power switch.

2. When filling container bottles, in order to ensure good balance performance of the instrument during operation and avoid significant vibration, all test bottles should be evenly distributed during bottling, and the liquid content of each bottle should be roughly equal. If there are not enough containers, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.

3. Connect the power supply, turn on the power switch, the indicator light will turn on, slowly adjust the speed control knob to reach the desired speed.

Precautions for using vortex oscillator:

1. The working power supply provided by the user should meet the specified requirements. When replacing the fuse of the vortex oscillator, the power cord should be pulled out of the socket, the power should be cut off, and if there is a malfunction in the electrical part of the fuse of the same model, it should be repaired by a professional. It is strictly prohibited to insert fingers into the gap of movement during the operation of the machine. It is strictly prohibited to move the machine during operation.

2. The vortex oscillator machine works at a high place and should be supervised and cleaned by a dedicated person. The power should be unplugged first. When the machine is working, in order to ensure good stability, attention should be paid to the balance at both ends.

3Ika vortex oscillatorBefore each shutdown, the speed control knob must be placed in the smallest position, the power switch must be turned off, and the power supply of the vortex oscillator must be cut off. During continuous operation, the vortex oscillator should be inspected every six months, including fuse control components and fasteners. After one year of use, the noise of the transmission components of the vortex oscillator is normal wear and tear.